Axioskop 2
plus
START-UP
Axioskop 2
mot plus
Attachments and conversions
Carl Zeiss
B 40-075 e 10/03
2-35
2.2.18
Attachment of intermediate tube
for image projection
The intermediate tube for image projection can
only be used with the binocular tube from the
Axioplan 2 line.
•
Use SW 3 ball-headed screwdriver to loosen
clamping screw (2-48/
8
) and remove available
tube of the Axioskop 2
plus
in an upward
direction.
•
Insert dovetail of the adapter for the
Axioskop 2
plus
6
) in the stand opening
) on the underside and slightly tighten
).
•
5
) in countersunk
6
) and screw it into
) on the stand.
•
8
) and fixation
).
•
Attach intermediate tube for image projection
(2-48/
) on the stand and tighten clamping
10
) only slightly at first. Centering
is performed using the dovetail.
•
Insert second clamping screw with washer
) in the drilled hole provided on the rear
of the intermediate tube at (2-48/
), screw it in
the rear threaded hole of the adapter and
tighten it slightly.
•
Align the intermediate tube with the edges of
the upper stand part and alternately tighten
clamping screws (2-48/
).
•
Use the cover of the tube lens storage case to unscrew the tube lens from the Axioplan 2 tube
(2-48/
) and store it in the case.
•
) without tube lens on the intermediate tube, align it with the edges of
the intermediate tube and tighten clamping screw (2-48/
).
•
Equip the Axioplan 2 tube (2-48/
) with eyepieces with field number 23.
☞
The zoom system always points to the right. The specimen is positioned on this side below the
exit opening of the zoom tube.
Fig. 2-48
Attachment of intermediate tube
for image projection
