Axioskop 2
plus
OPERATION
Axioskop 2
mot plus
Documentation
Carl
Zeiss
B 40-075 e 02/01
3-41
3.4 Documentation
3.4.1
Attachment of photomicrography equipment
The Axioskop 2
plus
/ Axioskop 2
mot plus
equipped with a binocular phototube (3-28/
) can be
switched from observation to photomicrography (pushrod pulled out) using the pushrod (3-28/
). The
special T2 adapter 2.5x and other T2 adapters permit commercially available 35 mm SLR cameras (SLR -
Single Lens Reflex) and special microscope cameras (e.g. MC 200
CHIP
from Carl Zeiss) to be attached to
the 60 mm interface camera port of the binocular phototube. For use of photomicrography equipment
please see the relevant operating instructions.
Attachment of a SLR camera
(e.g. CONTAX 167 MT)
•
Screw T2 adapter (416010-0000-000, 3-28/
3
)
suitable for the used camera on the 2.5x
connector for T2 (456005-0000-000, 3-28/
).
•
Attach camera (416181-0000-000, 3-28/
if required, cable release (416167-0000-000,
3-28/
1
).
•
) from the phototube
) and insert premounted unit
A
in the
phototube.
•
Align unit in the required position and tighten 3
Allen screws (3-28/
).
•
When artificial light color reversal film is used,
the color temperature key 3200 K (3-1/
12
) must
) then lights up.
☞
If focusing is not to be performed
through the viewfinder of the camera,
a focusing eyepiece with photo reticle
MC 2.5x / d = 26 mm (454075-0000-
000, see p. 1-15) must be used.
☞
For detailed information on SLR
cameras please see manual G 42-406
II, "35
mm SLR cameras for
microscopes and stereomicroscopes".
Fig. 3-28
Attachment of SLR camera,
(e.g. Contax 167 MT)
