Zeiss AxioObserver D1, User Manual

Page: 2 / 13

Zeiss AxioObserver.D1 Microscope
Room: 3164A
Start Up Procedure
1. Remove dust cover from microscope
2. Toggle FluoArc Lamp switch ON
3. Toggle Power Bar switch ON
4. Turn Microscope ON
‐ by pressing power button located on left side of microscope
5. Turn ON computer
6. Log on to: Observer User account ( no password )
7. Open Program: AxioVision Rel. 4.8
Shut Down Procedure
1. If used oil, gently remove oil from objective using neatly folded
dry lens paper
2. Put 10x objective in place, and lower objective
3. Close AxioVision program
4. Shut down computer. Wait until completely turned off
5. Turn Microscope OFF
6. Toggle Power Bar switch OFF
7. FluoArc Lamp :
‐ Regular work hours : set intensity to 50% on control pad (F2),
and leave lamp ON
‐ Non ‐ work hours : Turn lamp OFF
8. Cover microscope with dust cover, but DON’T COVER THE HOT
LAMP HOUSING!!