INTRODUCTION
ZEISS
Notes on instrument safety
Axiolab 5
10
430037-7444-001
05/2019
CAUTION
Operating the instrument in an area with a potentially explosive atmosphere is prohibited.
It may be operated only on stable, non-flammable surfaces.
Specimens must be disposed of appropriately in accordance with applicable statutory
regulations and internal work instructions.
CAUTION
The immersion fluid Immersol 518 N
can cause skin irritations. Avoid any contact with skin,
eyes and clothes. Read the safety data sheets on Immersol 518 N
, Immersol 518 F
and
Immersol W
carefully. If skin contact occurs, wash off immediately using lots of water and
soap.
If eye contact occurs, flush with water immediately for at least 5 minutes. Seek medical
assistance if irritation continues.
CAUTION
Dispose of immersion fluid Immersol 518 N
appropriately: Do not allow it to contaminate
surface water or enter drains or the sewage system.
CAUTION
Do not bring any flammable or easily combustible materials into the light beam.
CAUTION
This device belongs to LED Risk Group 2 as specified in IEC 62471 and emits LED radiation.
Never look into the LED beam of the illuminating device – either with or without optical
instruments. Failure to comply with this warning may result in eye injuries!
ATTENTION
The manufacturer assumes no liability for any use of the microscope, its assemblies or
individual parts if these are used in in a manner or for any purpose other than those described
in this operating manual. This also applies to any maintenance or repair work not performed
by authorized maintenance and repair personnel. Moreover, the warranty and any claims
thereunder will be voided.
ATTENTION
Dirt and dust may affect the microscope’s performance. Protect it by using a dust cover when
it is not in use. Always make sure that the instrument is switched off before covering it up.