![background image](http://html2.mh-extra.com/html/zeiss/axiocam-mr/axiocam-mr_installation-and-reference-manual_3352801003.webp)
kçíáÅÉ=çÑ=íÜÉ=mêçÇìÅÉê=
The referenced Software of Carl Zeiss ("Zeiss Software"), contained in this
documentation, was designed, realized, verificated, validated and released in
a certificated process environment. The quality management system is
certified following the rule of DIN EN ISO 9001.
The fields of application of the Software are common tasks and applications in
microscopy respectively imaging (so called "Off-The-Shelf Software"). Though
the user acknowledges that in any kind of use the end user of the Software is
responsible for the validation of the Software for the end user’s dedicated
intend of use considering all requirements of law and standards (e. g. 21 CFR
part 11, FDA, MDD etc.). If necessary the end user has to establish, to
document, to implement and to maintain a special process to fulfill all the
requirements to be conform with the validate rules of law and standards.
CARL ZEISS DOES NOT WARRANT THAT THIS SOFTWARE IS USABLE FOR
SPECIAL PURPOSES OTHER THAN IN THE FIELDS OF APPLICATION DEFINED
ABOVE.
p~ÑÉíó=
Refer to the safety notes and instructions in the manuals of all
necessary devices (e.g. microscope peripherals, cameras,
computers, computer additionals, etc.) before installing and
using the software.