Installation
¾
Power is supplied to the AxioCam MR via the FireWire interface. Before
operating the AxioCam MR for the first time, you should therefore check
that the specifications of your PC’s FireWire interface correspond with the
power requirements of the AxioCam MR.
¾
If you switch off the PC, the AxioCam MR is also switched off.
¾
The AxioCam MR has been designed for continuous operation. During
operation the camera may heat up. This is quite safe, and does not in any
way impair the functioning of the device.
léÉê~íáåÖ=íÜÉ=Å~ãÉê~=çå=~=åçíÉÄççâ=
Depending on your notebook’s specifications, you can choose between two
forms of connection:
connection of the camera to the FireWire PCcard (CardBus) interface card
connection of the camera to the notebook’s integrated (onboard)
FireWire interface
In both cases the FireWire hub is also required to supply power to the
AxioCam MR. The AxioCam MR is connected using the cables supplied with
the camera and the hub.
léÉê~íáåÖ=íÜÉ=Å~ãÉê~=çå=~=åçíÉÄççâ=ìëáåÖ=íÜÉ=
cáêÉtáêÉ=m`Å~êÇ=E`~êÇ_ìëF=áåíÉêÑ~ÅÉ=Å~êÇ=
fåëí~ääáåÖ=íÜÉ=m`Å~êÇ=E`~êÇ_ìëF=áåíÉêÑ~ÅÉ=Å~êÇ=çå=íÜÉ=
åçíÉÄççâ=
Static electricity can damage electronic components. To protect
electronic components against static electricity, do not touch them
until you have earthed yourself to the casing of the device. Never
touch the contacts of electronic components.
12
M 60-3-0014 e / printed 12.2008
