Installation
¾
Connect the AxioCam MR to your computer in accordance with the
description in the section "Setting up the camera system". The LED on
the back of the camera lights up in red briefly and then goes out.
¾
Press the button next to the expansion socket of the AxioCam MR using a
pointed object (e.g. a pencil). Keeping the button depressed, briefly
remove and then reinsert the FireWire connector on the camera. Now the
LED lights up red and then changes to green.
Do not press down hard on the button. This can damage the
camera’s electronics.
¾
Update the firmware of the AxioCam MR by running the installation
program. Here follow the description in the section "Installing the camera
driver using the setup program". If necessary, at the end of the
installation program the firmware of the AxioCam MR must be updated.
Follow the instructions on the monitor.
NKP
kçíÉë=çå=j~áåíÉå~åÅÉ=
`~ãÉê~=ÉäÉÅíêçåáÅ=
Camera, interface and power supply are maintenance free.
léíáÅ~ä=ëóëíÉã=
The internal optical components of the camera should always be protected. If
no lens or TV adapter incorporating optics is screwed into the camera's C-
Mount thread, the camera's sensor and IR-filter must be protected by
screwing the protective cap into the camera's C-Mount thread.
30
M 60-3-0014 e / printed 12.2008
