Installation
¾
Power is supplied to the AxioCam MR via the FireWire interface card. If
you switch off the PC, the camera is also switched off.
¾
The AxioCam MR has been designed for continuous operation. During
operation the camera may heat up. This is quite safe, and does not in any
way impair the functioning of the device.
léÉê~íáåÖ=íÜÉ=Å~ãÉê~=çå=~=m`=ïáíÜ=çåÄç~êÇ=
cáêÉtáêÉ=áåíÉêÑ~ÅÉ=
`çååÉÅíáåÖ=íÜÉ=Å~ãÉê~=íç=íÜÉ=m`=
Lay the data cable carefully between the camera and the PC. Make
sure that the cable is a safe distance from hot light sources on the
microscope, to prevent it being damaged by heat.
To connect the camera to a PC, you require a FireWire cable with a 6-pin
connector at both ends. This cable is supplied with the camera.
Connect the FireWire cable of the AxioCam MR to the onboard FireWire
interface of the PC.
Connecting the AxioCam MR to the onboard FireWire interface of the PC
AxioCam MR Instal Reference
11
