Zeiss AT 030, Product Documentation Set

Page: 14 / 88

2 Safety notes Instruction for use
AT 030 2.4 Measures and duties of the operator
8 / 60 319300-9120-000-GA-GB-240320
Maintenance and inspection
u
To ensure safe operation of the device and reach the expected
service life: Observe the maintenance and inspection intervals
that are specified in these instructions for use.
Modifications to the product
Modifications to the product or failure to follow the manufacturer’s
instructions may substantially reduce the expected service life and
significantly increase the risks associated with the use of this device
and are thus not permitted.
Accessories and additional equipment
u
If you want to connect accessories or additional equipment to
the device: Contact your ZEISS representative [
} 5].
2.3.1 Messages to manufacturer and authorities
If a serious incident occurs in connection with this medical device
affecting the operator or another person, the operator (or person
responsible) must report this serious incidence to the manufacturer
or seller of the medical product. In the European Union, the
operator must report this serious incident to the responsible
authorities in the applicable country.
2.4 Measures and duties of the operator
Ambient conditions
u
Make sure that the installation conditions and the operation of
the device comply with the surgical requirements:
• Low vibration
• Clean environment
• Avoid extreme mechanical loads
u
Do not store or use this device in damp areas. Do not expose
the device to water splashes, dripping water or sprayed water.
u
Ensure that no liquids can enter the device.
Symbols and labels
u
Observe the symbols and labels attached to the device.