25 / 74
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 07/06/2019 Rev. 1.1 “User Manual for 20K-33KTL”
3.5.
Moving the 20K-33K TL inverter
This section describes how to move the inverter correctly
1)
When opening the packaging, insert your hands into the slots on both sides of the inverter and take a
hold of it as shown in figures 14 and 15. Two people are needed to carry out this operation in order to
ensure the safety of people and the correct handling of the inverter.
Figure 14 – Removing the polystyrene protections
Figure 15 – Removing the inverter from its packaging
2)
Lift the inverter from its packing box and move it to the installation position.
To prevent damage and personal injury, hold the inverter firmly when moving,
as it is a heavy piece of equipment.
Do not position the inverter with the input/output terminals in contact with
other surfaces, as these are not designed to support the weight of the inverter.
Always position the inverter horizontally.
When placing the inverter on the floor, make sure to place a support under the
unit to protect its front door.
Attention