59 / 74
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 07/06/2019 Rev. 1.1 “User Manual for 20K-33KTL”
(B)
Press the “OK” key to enter the “Event List” menu.
The “Event List” menu is used to display the events recorded by the inverter, both historical and in real
time, showing the progressive number of the event, its identification code, and the date and time of its
occurrence. The user can access this interface from the LCD display to check the details of the alarms and
alerts. Errors will be listed according to the date and time they occurred, so the most recent events will
be listed first. For more information, refer to the figure below.
Press the “Back” key on the main interface and then the “Down” key, then enter the “2. Event List” menu.
From here you can select the “1. Current Events” menu for the list of current events or “2. Historical
Events” for the list of historical events.
(C)
Press the “OK” key to enter the “System Info” menu.
The “System Info” menu contains the following submenus:
