8 / 74
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 07/06/2019 Rev. 1.1 “User Manual for 20K-33KTL”
Operation
Contact with the electrical grid or the terminal of the equipment
may cause electrocution or fire!
•
Do not touch the terminal or the conductor connected to the
electrical grid.
•
Follow all the instructions and safety requirements relating to the
mains connection.
Danger
Some internal components reach very high temperatures when
the inverter is in operation. Wear protective gloves!
Attention
Maintenance and repair
Before carrying out any repairs, disconnect the inverter from the
mains network (AC side) and from the photovoltaic system (DC
side).
After switching off the AC and DC switches, wait 5 minutes before
carrying out any repairs or maintenance on the inverter!
Danger
The inverter should start working again after any faults have been
fixed. For any repairs, contact your local authorised service centre;
Do not disassemble the internal components of the inverter
without permission. This will void the warranty. Zucchetti Centro
Sistemi S.p.A. shall not be responsible for any damage or loss
caused by these actions.
Attention
