background image

 

          52 / 74 

Identificazione: MD-AL-GI-00 
Rev. 4.0 del 31.01.18 - Applicazione: GID 

Manual of 07/06/2019 Rev. 1.1 “User Manual for 20K-33KTL” 

 

A faster way to change the language is to  press the “Menu/Back” key and the  “OK” key at the same 

time.  

In the current firmware version (V1.60), the available languages are Chinese, English, Italian, German, 
French, Ukrainian, Slovak and Portuguese; future firmware updates may add additional languages. 

 

Initial parameters

 

The user can change the start parameters directly from the LCD display. The user must first copy the TXT 

files to the SD card. These files can be requested from Zucchetti Centro Sistemi Spa technical support. 

Select 12 “InitParameters” and press “OK” to enter the menu for setting the start parameters. The display 

will show “Enter PWD!”, press “OK” to enter the password. Enter the password “0001” using the “Up” and 
“Down”  keys  to  select  the  number  and  “OK”  to  move  to  the  next  one,  and  confirm.   If  the  display  shows 

“Incorrect,  try  again,”  press  the  “Back”  key  and  enter  the  password  again.  When  the  password  has  been 

entered correctly, you can enter the menu.  The new start parameters will now be loaded onto the inverter 
automatically. 

If the setting is successful, “OK” will be displayed; otherwise, “Error” will be displayed. 

Attention: do not enter this menu if the microSD card is not inserted in the appropriate slot of the inverter 

or if the correct TXT files have not been copied to it. 

 

Safety Voltage

 

The user can change the value of the protection voltage directly from the LCD display. The user must first 

copy the TXT files to the SD card. These files can be requested from Zucchetti Centro Sistemi Spa technical 
support. 

Select 13 “Safety V” and press “OK” to enter the menu for setting the  protection voltage. The display will 
show  “Enter  PWD!”,  press  “OK”  to  enter  the  password.  Enter  the  password  “0001”  using  the  “Up”  and 

“Down”  keys  to  select  the  number  and  “OK”  to  move  to  the  next  one,  and  confirm.   If  the  display  shows 
“Incorrect,  try  again,”  press  the  “Back”  key  and  enter  the  password  again.  When  the  password  has  been 

entered correctly, you can enter the menu.  The new protection voltage will now be loaded on the inverter 
automatically. 

If the setting is successful, “OK” will be displayed; otherwise, “Error” will be displayed. 

Attention: do not enter this menu if the microSD card is not inserted in the appropriate slot of the inverter 
or if the correct TXT files have not been copied to it. 

 

Safety Hz 

The user can change the value of the protection frequency directly from the LCD display. The user must first 

copy the TXT files to the SD card. These files can be requested from Zucchetti Centro Sistemi Spa technical 
support. 

Select 14 “Safety Hz” and press “OK” to enter the menu for setting the protection frequency. The display will 
show  “Enter  PWD!”,  press  “OK”  to  enter  the  password.  Enter  the  password  “0001”  using  the  “Up”  and 

“Down”  keys  to  select  the  number  and  “OK”  to  move  to  the  next  one,  and  confirm.   If  the  display  shows 
“Incorrect,  try  again,”  press  the  “Back”  key  and  enter  the  password  again.  When  the  password  has  been 

entered  correctly,  you  can  enter  the  menu.    The  new  protection  frequency  will  now  be  loaded  on  the 
inverter automatically. 

If the setting is successful, “OK” will be displayed; otherwise, “Error” will be displayed. 

Attention: do not enter this menu if the microSD card is not inserted in the appropriate slot of the inverter 
or if the correct TXT files have not been copied to it. 

 

Summary of Contents for TL Series











































































Reviews: