60 / 74
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 07/06/2019 Rev. 1.1 “User Manual for 20K-33KTL”
Inverter type
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “1. Inverter
type” menu. Here you can see the power of the inverter model
Serial number
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “2. Serial
Number” menu. Here you can see the serial number of the inverter.
SW version
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “3. SW
Version” menu. Here you can see the software version.
HW version
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “4. HW
Version” menu. Here you can see the hardware version.
Country
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “5. Country”
menu. Here you can see the country code that has been set.
Input
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “6. Input”
menu. Here you can see the type of input of the photovoltaic strings.
AC Thresholds
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “7. AC
Thresholds” menu. Here you can see the value of the voltage and frequency thresholds for the relay to trip.
Power factor
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “8. Power
Factor” menu. Here you can see the value of the power factor.
P(Grid) Feed-in
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “9. P(Grid)
Feed-in” menu. Here you can see the value of the set value of the power fed into the grid.
Power Ratio
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “10. Power
Ratio” menu. Here you can see whether this function has been enabled or not.
P(f)
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “11. P(f)”
menu. Here you can see the P(f) value that has been set.
Q(v)
