117 / 136
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 20000TL - 33000TL-V2
Rev. 1.1 15/03/2021
10.4.3.
ZSM-DATALOG-04 AND ZSM-DATALOG-10 DEVICES
The initial status of the LEDs on the datalogger will be:
POWER steady on
485 steady on
LINK off
STATUS steady on
10.4.4.
WI-FI CONFIGURATION
To configure the datalogger via Wi-Fi, please refer to the chapter on monitoring systems, as the
configuration is similar to that of any type of Wi-Fi adapter.
10.4.5.
Ethernet configuration
1)
Insert the RJ45 connector of the Ethernet cable in the ETHERNET input of the datalogger.
Figure 85 – Ethernet cable connected to the datalogger
2)
Connect the other end of the Ethernet cable to the ETH output (or equivalent) of the modem or a
suitable data transmission device.
3)
Activate the search for Wi-Fi networks on your phone or PC in order to display all the networks
visible from your device.
