133 / 136
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 20000TL - 33000TL-V2
Rev. 1.1 15/03/2021
10.4.8.1.
Configuring the Datalogger on the ZCS Azzurro portal
Access the ZCS Azzurro portal (
https://www.zcsazzurroportal.com
). For new users, click “Sign up now” to
register on the portal by entering your email, username and password. After logging into the portal, click
“Configuration Panel”, and then select the option “Create field with Datalogger.” The “Create New Field”
operation will be possible only if the user’s privileges allow acquiring new fields (at the time of registration
the limit will be equal to 1, an upgrade is required to increase the limit).
Enter the serial number (S/N) of the datalogger and click “Check RMS”. If the datalogger has been configured
correctly, a screen will open where you can enter the required information relating to the field to be
installed.
Once the “location” of the field has been entered, click “Calculate Location Information” to allow the system
to obtain the latitude, longitude and time zone of the installation. Click “Confirm” to complete the
configuration of the field. You only need to wait a few minutes to view the data flow on the ZCS Azzurro
portal.
ATTENTION:
The location data is essential for the correct operation of the datalogger in the ZCS
system. It is important to define it very carefully.
