Zaber Technologies Inc. X-MCB1 Series, User Manual, Page: 31 / 60

27 ZABER TECHNOLOGIES INC.
Set Home Status 103 Home Status Setting Home Status
Set Home Sensor Type* 104 Home Sensor
Type Setting Home Sensor Type
Set Auto-Home Disabled
Mode* 105 Auto-Home
Disabled
Mode Setting Auto-Home Disabled Mode
Set Minimum Position* 106 Minimum
Position Setting Minimum Position
Set Knob Disabled Mode* 107 Knob
Disabled
Mode Setting Knob Disabled Mode
Set Knob Direction* 108 Direction Setting Direction
Set Knob Movement Mode* 109 Movement
Mode Setting Movement Mode
Set Knob Jog Size* 110 Jog Size Setting Jog Size
Set Knob Velocity Scale* 111 Velocity Scale Setting Velocity Scale
Set Knob Velocity Profile* 112 Velocity
Profile Setting Velocity Profile
Set Acceleration Only* 113 Acceleration Setting Acceleration
Set Deceleration Only* 114 Deceleration Setting Deceleration
Set Move Tracking Mode* 115 Tracking
Mode Setting Tracking Mode
Set Manual Move Tracking
Disabled Mode* 116 Tracking
Mode Setting Tracking Mode
Set Move Tracking Period* 117 Tracking
Period Setting Tracking Period
Set Closed-Loop Mode* 118 Closed-Loop
Mode Setting Closed-Loop Mode
Set Slip Tracking Period* 119 Tracking
Period Setting Tracking Period
Set Stall Timeout* 120 Timeout Setting Timeout
Set Device Direction* 121 Direction Setting Direction
Set Baud Rate* 122 Baud Rate Setting Baud Rate
Set Protocol* 123 Protocol Setting Protocol
Convert To Ascii* 124 Baud Rate Command Baud Rate
Error 255 n/a Reply Error Code
* The settings for these commands are saved in non-volatile memory, i.e. the setting persists even
if the device is powered down. To restore all settings to factory default, use command 36.