Red - Error
On/blinking: Device has lost its settings, or an error has occurred. Please contact Zaber Technical
Support.
•
Yellow - Communication/Busy
On: Device is moving, or data is being transferred.
•
Blinking: Device is under manual control via the knob (in Velocity mode). The blinking rate is
proportional to movement speed.
•
Blinking at fixed rate: Packet corruption has occurred for ASCII commands sent with a checksum.
•
Blue - Slip/Stall
On: The device is slipping.
•
2 short flashes every 1 sec: The stationary device has been forced out of position.
•
On-Off cycle every 2 sec: The device has stalled and stopped.
•
Indicators
8
