Device Overview
Connectors
All images are shown looking into the device.
Power
Pin
Description
1
24 - 48V
2
GND (Note: Zaber's power supplies ground this pin to AC Earth)
Note:
To prevent damage to the device due to static buildup, the device should be properly grounded. The
power supplies Zaber provides for X-Series devices are non-isolated and thus ground the device chassis to
Earth via the negative terminal of the power supply. If for any reason you are using an isolated power supply,
please ensure your device is grounded by connecting the negative terminal of the power connector to AC
Earth.
RS-232 Communications
Pin Previous
Next
1
Power
Power
2
Ground
Ground
3
Receive
Transmit
4
Transmit Receive
Default Settings
Baud Rate: 115200
•
Protocol: Zaber ASCII
•
Specifications
Supported Protocols: Zaber ASCII, Zaber Binary
•
Supported Baudrates: 9600, 19200, 38400, 57600, 115200
•
Bits: 8
•
Parity: None
•
Stop Bits: 1
•
Flow Control: None
•
Indicators
Green - Power
On: Controller is operational.
•
Blinking at 2Hz: The power supply voltage or device temperature is out of range.
•
Fading in and out slowly: The device is parked. See the tools parking (T:65) command.
•
Device Overview
7
