To daisy-chain X-Series devices with T-Series and A-Series devices:
Ensure all devices are set to the same communication protocol and baud rate before connecting them.
If any T-Series devices will be in the chain, then the communication protocol must be Binary at 9600
baud rate.
•
Connect any X-Series devices at the start of the chain (closest to the computer). This configuration
will reduce the number of adaptor cables required.
•
Connect a T-XDC (or S-XDC for daisy-chaining an A-MCB2) adaptor cable to the Next port of the
last X-Series device in the chain, and to the Prev port of the T-Series or A-Series device.
•
Power supplied to an X-Series device will not be transmitted to any T-Series or A-Series devices in
the chain.
•
Contact Zaber Technical Support for assistance selecting connecting cables when daisy-chaining
multiple series.
•
Daisy-Chaining Devices
10
