9
CONFIDENTIAL
DOC-USR-0045-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
2.0
QUICK START GUIDE
2.1
If You Have Received a System from Z3 with the Software Preloaded
To start working with the encoder, you can go straight to Section 7.0, “RUNNING THE Z3-DM8169-4K-RPS
ENCODER,” on page 17. This section describes how to quickly stream 4K to a .ts file or through the
Ethernet via UDP or RTP. Using the decoder is described in Section 8.0, “ RUNNING THE Z3-DM8169-4K-
RPS DECODER” on page 31. Adding password protection is described in Section 11.0, “USING THE
PASSWORD FEATURE,” on page 43. Finally, a summary of each parameter that can be configured in the
GUI is given in Section 12.0, “SUMMARY OF OPTIONS,” on page 45.
2.2
If You Already Have a System from Z3 and Need to Update the Firmware
You can update the firmware via the web GUI interface by following the instructions in Section 10.1, “
Method 1: Updating the Image File,” on page 37.
2.3
If You are Ready to Start Development
Details on how to untar and build the code can be found in Section 5.0: “UNTARRING AND BUILDING THE
SAMPLE CODE,” on page 11. A brief overview of the code itself can be found in Section 6.0: “ CODE
OVERVIEW” on page 13.
Details on how to set up your system to access the code you have built can be found in Section 10.0:
“RUNNING THE CODE YOU BUILT ON THE BOARD”, on page 37.
