45
CONFIDENTIAL
DOC-USR-0045-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
12.0
SUMMARY OF OPTIONS
This section lists the different options that are available in the various menus.
12.1
The System Setup Tab
Parameter
Options (default in bold)
Notes
Local IP Address
192.168.x.y
(192.168.81.68)
Sets the IP address of the Z3-DM8169-4K-RPS.
Note that a “save” of these settings and a
reboot is needed for changes to this value to
take effect.
Local Netmask
255.255.z.w (
255.255.0.0
)
Sets the netmask of the Z3-DM8169-4K-RPS.
Note that a “save” of these settings and a
reboot is needed for changes to this value to
take effect.
Default Gateway
192.168.a.b (
192.168.0.1
)
Sets the network gateway to use for the Z3-
DM8169-4K-RPS. Note that a “save” of these
settings and a reboot is needed for changes to
this value to take effect.
Use DHCP
Checked
Unchecked
Sets whether DHCP is used. See “Using DHCP”
for more details.
Set Device Name
Sets the name for the Z3-DM8169-4K-RPS.
Set Password
Sets the system password. See Section 11.0,
“USING THE PASSWORD FEATURE” on page 43 for
more details.
update device firmware
Click to update to new firmware. See Section
10.1, “Method 1: Updating the Image File” on
page 37 for more details.
download device logs
Clicking this causes the Z3-DM8169-4K-RPS to
extract a set of diagnostic logs that can be sent
to Z3 Technology in the event of an issue to be
reported. This file is saved on the PC which the
GUI is being run from.
Display Mode
(Decode Only)
HDMI
Needs to be set to HDMI on the Z3-DM8169-4K-
RPS.
