37
CONFIDENTIAL
DOC-USR-0045-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
10.0
RUNNING THE CODE YOU BUILT ON THE BOARD
There are two ways to take the image files you built in Section 5.0 and run them on the board: (1) Updating
the image file, and (2) Setting up NFS/TFTP to link to your development PC.
10.1
Method 1: Updating the Image File
(1)
Run the Web Interface (Steps (2)-(13) in Section 7.0).
(2)
Select “update device firmware” from the main screen:
Figure 33 Updating the Device Firmware from the Web Interface
Click here
