Z3 Technology Z3-DM8169-4K-RPS User Manual Download

Page: 17 / 65

CONFIDENTIAL

DOC-USR-0045-05

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

7.0

RUNNING THE Z3-DM8169-4K-RPS ENCODER

To encode 4K video, complete the following steps:

7.1

Prepare the 4K Source

(1)

Set the video source to 4K2K30 (3840x2160 at 30fps) and connect an HDMI 1.4 cable to it.

-29.97, 25, and 23.98fps also supported.

7.2

Connect the Z3-DM8169-4K-RPS

For these steps, please refer to

Figure 6

(2)

Connect the supplied 2.5mm serial cable and NULL modem adapter to your PC.

(3)

Take the HDMI 1.4 cable from step (1) and connect it to HDMI In on the Z3-DM8169-4K-RPS.

(4)

Connect an Ethernet cable to the Ethernet jack on the Z3-DM8169-4K-RPS. Connect the other end of

the Ethernet cable directly to a PC or to a hub connected to a PC. You will use this PC to control
the Z3-DM8169-4K-RPS.

(5)

Take a USB 3.0 drive that the encoder will write to and connect it to USB1 (the top USB port). USB

3.0 is recommended to ensure that it is fast enough to write the encoded data.

Note:

The drive must be formatted in either FAT32, NTFS, VFAT, EXT3, or EXT4 format. exFAT is

not currently supported.

HDMI In

Ethernet

USB1
(top)

12V

Power

Figure 6 Encoder Connections for the Z3-DM8169-4K-RPS

Serial

Power Switch

Summary of Contents for Z3-DM8169-4K-RPS


































































Search results

Summary of Contents for Z3-DM8169-4K-RPS

Reviews:

Related manuals for Z3-DM8169-4K-RPS

Brands by name

Popular brands

Z3 Technology Z3-DM8169-4K-RPS, User Manual

Search results

Summary of Contents for Z3-DM8169-4K-RPS

Reviews:

Related manuals for Z3-DM8169-4K-RPS

Brands by name

Popular brands