20
CONFIDENTIAL
DOC-USR-0045-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
(15)
Click on the CH1 tab to bring up the encoder settings:
7.7
Configure the Encoder to Write to File and Start the Encoder
(16)
Set “Output Format” to “TSFILE”
(17)
In “Dest Address” type in the name of the file to save to
(example: /media/sda1/test_4k2k.ts to save to file “test_4k2k.ts” on USB1)
(18)
Check if the encoder has already autostarted (the encoder will autostart if it senses a valid input
and 20 seconds have elapsed since the Z3-DM8169-4K-RPS came up). If it has autostarted, click on
“stop.” The status will then change to “STOPPED.”
(19)
Click on “start” to begin encoding. You will see LED2 start to flash. This indicates the encoder is
running.
Click here
Figure 9 CH1 Tab (Top Part)
