30
Learning IR Commands
Your HSK-100Z is equipped with learning capability. This allows you to
"teach" your HSK-100Z certain functions from your original equipment
remote. Please follow the steps below.
1
Press the desired device mode key (e.g. TV).
2
Hold down "CH+" and "VOL-" on the HSK-100Z simultaneously for
3 seconds until the green indicator lights up.
3
Enter the learning code "0", "0", "0", "0". The green indicator light
will flash once then stay lit. The HSK-100Z is now ready to learn.
4
Place the HSK-100Z and your device remote on a flat surface,
aimed at each other 1-3 inches apart.
5
Press a desired key once and release on the HSK-100Z which you
want to learn the command. The green indicator will flash once
then stay lit.
6
Press and keep holding the key on your original equipment
remote which you want to learn for a few seconds.
7
When the green indicator light flashes twice and stays lit
continuously, the command has been learned successfully and
you can release the key on your original equipment remote. If the
red indicator light flashes six times, it shows an error in the
learning process. Adjust the position of both remotes and repeat
from step 5 again.
8
Repeat from step 5 to learn other key functions, or press the
same device mode key on step 1 (e.g.TV) to terminate the
learning mode, the green indicator light will flash twice and then
go out immediately.
