11
Scene Operation
After the scene setup is done, you can trigger the desired scene via
scene control keys in front panel of the HSK-100Z.
Figure 4 Scene Control Keys of the HSK-100Z
The green OK LED blinks when the operation is successful, and the red
ERROR LED blinks when it’s failed.
Scene Controller Conf command
This section is for advanced user. Please ignore it if you don’t
understand. It won’t affect any normal usage before you send
commands described in this section.
The command class COMMAND_CLASS_ASSOCIATION can be used to
add a node to the scene button. The scene button 1 will send to
devices in the group #9, the scene button 2 will send to group #10 and
so on.
The “ON” buttons 1-4 send SCENE_ACTIVATION_SET to devices
in the group #1-4. “SHIFT + ON 1-4” send to devices in the group #5-8.
However, please notice that the scene created by this command is
different from that created by the HSK-100 keypad. If we use this
command to create a scene, the existing scenes created by the HSK-
100Z will be deleted automatically. In addition, if we use HSK-100Z to
assign a device to a scene button, the setting created by the
ASSOCIATION_SET will be dropped as well.
Scene
Control Keys
