Z-Wave HSK-100Z, User Manual

Page: 17 / 41

15
Definition of Association groups
The HSK-100Z supports 24 association groups. Each group can support
up to 232 devices.
Group Function
1-8 Zone Control #1-#8
9-24 Scene Control #1-#16
Change Device Configuration
This function is used to modify the parameter of the Z-Wave device
via the configuration command class. This is possible only when the
HSK-100Z is primary controller or inclusion controller.
Step Setup Key Setup LED Behavior
1
Press
OK LED stays on
2
Press 0-9 key in the front

OK LED blinks once and
stays on for each key
press
3
Press enter

OK LED stays on then
flashes once and turns
off

LED B off

The input number is the
parameter number.
4
Press 0-9 key

OK LED blinks once and
stays on for each key
press
5
Press enter

OK LED blinks once and
then keeps blinking.

The input number is the
configuration value.
6
Press the program
button in the device.

OK LED blinks and turns
off.

The configuration value
is saved to the device.