Z-Wave HSK-100Z, User Manual

Page: 18 / 41

16
Add A Simple AV Device
The HSK-100Z supports the Simple AV Control command class to
control Z-Wave Simple AV devices. It can support up to 8 channels
with different Z-Wave AV devices. To change to different AV channels,
press each corresponding AV device mode key.
Channel Mode Key
1 TV
2 DVD
3 SAT/CBL
4 AUX
5 Shift+TV
6 Shift+DVD
7 Shift+SAT/CBL
8 Shift+AUX
To add a Z-Wave Simple AV device to HSK-100Z, please follow these
steps:
Step Setup Key Setup LED Behavior
1
Press in Zone
Setup area

OK LED on

LED A blinks slowly
2 Press Shift

OK LED blink
3
Select a zone group
number from 1 to 8

LED A off

LED B blinks slowly

This will select device AV
channel 1-8.
4
Press the program button
on the target device

OK LED blinks for a while and
then turns off.
If a channel is associated with Z-wave Simple AV devices, the local IR
transmission of that channel will be disabled. Instead, the Simple AV
commands will be sent to the associated Z-wave devices.
To recover to local IR emitter, please remove the Z-Wave AV device
using the following steps:
Step Setup Key Setup LED Behavior
1
Press
in Zone Setup area

OK LED on

LED A blinks slowly
2 Press Shift

OK LED blink
3
Select a zone group
number from 1 to 8. Press
1 here.

LED A off

LED B blinks slowly

This will select device AV
channel 1-8.
4
Press the program button
on the target device

OK LED blinks for a while and
then turns off.