Z810
System
User
Manual
Z
Corporation
Z Corporation Service (781) 852-5050 / (887) 88-ZCORP
113
12.9 CLEAN POWDER SCREEN ON THE ZF8 POWDER FEEDER
The powder screen in the ZF8 Powder Feeder prevents any large pieces of debris from entering
the Feeder. Periodically, the screen needs to be cleaned in order to allow steady airflow through
the Feeder.
1. Remove wing nuts to expose powder
screen.
2. Use the external vacuum to remove any
debris.
3. Replace powder screen cover.
12.10 EMPTY POWDER DRAWER ON THE ZD8 DEPOWDERING UNIT
The Powder Drawer in the ZD8 Depowdering Unit collects the excess powder removed during the
depowdering process. The powder drawer should be emptied weekly. If you are a heavy user or if
your part geometry encapsulates large volumes of powder, the powder drawer may need to be
emptied more frequently.
1. Release powder drawer by moving the
control switch to the left.
PLEASE NOTE:
Be careful when opening
the access panel to the powder screen,
powder may be piled up behind the access
panel.
