Z810
System
User
Manual
Z
Corporation
Z Corporation Service (781) 852-5050 / (887) 88-ZCORP
103
12 MAINTENANCE
Maintenance Action Frequency
Z810 3D Printer
1. Change zc3 Wash Fluid
Once every two weeks or as needed
2. Flush Binder with Distilled Water
When not in use for two or more weeks
3. Clean Under Gantry
Once a month or as needed
4. Oil Slow Axis Rail
Once a week or as needed
5. Clean Filter
Once a month or as needed
6. Clean Spreader Roller
Once a month or as needed
7. Cleaning the Squeegee Squirters
If squirters become clogged
8. Bleed Air
If you run out of binder or air enters the fluid
system
ZF8 Powder Feeder
1. Clean Powder Screen
Once a week or after vacuuming up small parts
ZD8 Depowdering Unit
1. Empty Powder Drawer
Once a week or as needed
12.1 CHANGE ZC3 WASH FLUID
The zc3 wash fluid will need to be changed when the zc3 wash fluid becomes contaminated with
powder and turns a grayish-black color or when it is less then 1/2 full.
1. Open right cabinet door, and disconnect
zc3 wash fluid container.
2. Empty out zc3 wash fluid container.
Fluid Disconnect
- Push Silver
Button to Release
3. Remove filter.
