Z
Corporation
Z810
System
User
Manual
www.zcorp-users.com
24
2.2.3 POWDER
COLLECTION
DRAWER
P o w d e r
Collection
Drawer
Handle
Figure 15: ZD8 Powder Collection Drawer
All of the discarded powder from the depowdering process is
deposited in the Powder Collection Drawer at the base of
the ZD8 Depowdering Unit. During normal operation, the
drawer is actively sealed to the underside of the machine.
When the main control switch is in Powder-Drawer-Release
mode, the seal is disengaged from the drawer – allowing the
user to pull the drawer out from under the machine for
emptying.
The extending tow handle stores underneath the powder
drawer. To deploy the handle, slide it all the way forward
until it reaches the stop on the track. Then, lift the handle to
a comfortable walking height. Once the handle is deployed,
is can be used to tow, push, and maneuver the Powder
Drawer to and from the emptying location. The handle is
returned to its stored position by pivoting the handle down to
the floor, and then sliding it back under the Powder Drawer.
For information on how to remove powder from Powder
Collection Drawer, please see Section 12.10,
Empty Powder
Drawer from the ZD8 Depowdering Unit.
2.2.4 ZD8
CART
•
The ZD8 Cart allows for easy
transport of parts using the track
system.
For information on how to use the ZD8 Cart
and Track System, see Section 6.3,
Transferring the Parts to the Depowdering
Station.
Also refer to Section 7,
Depowdering
the Part
, for
instructions on how to depowder
your part.
Tracks
Figure 16: ZD8 Cart
