Z810
System
User
Manual
Z
Corporation
Z Corporation Service (781) 852-5050 / (887) 88-ZCORP
87
F1, S1
corresponds to
the entries in the
dialog box.
These additional targets
will be most even when
the alignment is correct.
Bull's eye targets, one for
each print head. When it
looks centered, the print
head is in alignment.
These reticules are
for the slow axis.
Notice how the
lines are centered
for the '0' choice.
These reticules are
for the fast axis.
Notice how the
lines are centered
for the '0' choice.
This area warms up
the print heads to get
them printing evenly. It
does not factor into
the alignment.
In this pattern, a properly aligned set has four longer lines with three shorter lines centered
between them. Print head 0 is the reference, print heads 1 through 5 are aligned to print head 0.
Each row is labeled at the left, F1 and S1 correspond to Fast1 and Slow1 on the dialog box and
following.