Spectrum Z™510 3D Printer Hardware Manual
3D Printer System Details
www.3dpuser.com
65
10/2/07
All Rights Reserved
10 3D Printer System Details
10.1 System Specifications
Warning:
Check ratings marked on product
BEFORE
plugging into a power source.
Dedicated power outlet requirements:
110 -120 VAC; 50/60Hz; 6.8A max., or
220 - 240 VAC:50/60Hz; 3.4A max., or
100 VAC; 50/60Hz; 7.8A max.
Network
Ethernet 10/100 base T
Temperature
68-85
°
F. (20-30
°
C)
Relative Humidity
20-60%, non-condensed
Weight
470 lbs. (210 kg)
3D Printer Z510 Dimensions
Cover Closed
42" x 31.25" x 50.5" (107cm x 79cm x 128cm)
Cover Open
42" x 31.25" x 73" (107cm x 79cm x 185cm)
Click
System Requirements
for additional information regarding system specifications for all 3D Printers on
the 3DP™ User Website.
Lithium Battery
Internal to the 3D Printer is a lithium coin cell type battery. This may be any one of the following: Type:
CR2032, either Maxell, Panasonic, Renata, Sanyo or Sony.
PLEASE NOTE:
This battery is not in a user accessible area and is not user replace-
able. The expected lifetime of the battery is in excess of five years. Replacement will be
handled by your Z Corporation
Customer Service Representative
.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.
CENELEC Class A Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to EN 55022. Class A devices are for office and light industrial environments, and are not generally suit-
able for home use.
WARNING
This is a Class A product. In a domestic environment this product may cause radio inter-
ference in which case the user may be required to take adequate measures.
