Spectrum Z™510 3D Printer Hardware Manual
Service Menu and Other Maintenance
www.3dpuser.com
56
10/2/07
All Rights Reserved
6. Have a paper towel ready as you lift the syringe tube fitting off of the septum to prevent binder from
dripping onto the print head contacts or into the print head housing.
7. In most cases, you can empty the syringe contents into a waste container, but you should check your
company, local, and state regulations to ensure you dispose of the binder in accordance to those
guidelines.
8. Repeat
Steps 5,
6,
and
7
for each binder line that needs bleeding. When finished, re-insert the print
head(s) and close the Carriage cover.
