Spectrum Z™510 3D Printer Hardware Manual
Routine Operations
www.3dpuser.com
25
10/2/07
All Rights Reserved
3. Check waste fluid. If it is half full, empty fluid. Empty contents in accordance to local or company safety
regulations. Close front cabinet tray.
WARNING
Do not recycle waste solution
. The waste is contaminated with powder and use of this
waste in the your 3D Printer will clog the fluid system. Use only binder and wash fluid
supplied by Z Corporation. Use of any other material may impact the performance and
safety of your 3D Printer System and will void the warranty.
4. Check binder bottles. The Z510 3D Printer is not equipped with binder level sensors. The user must
check the binder levels prior to each build to ensure the Z510 3D Printer has enough to complete the
build. View the binder levels through the cutout windows in the binder bottle cover on the top cover. If
it is half full, fill binder bottles.
PLEASE NOTE:
When printing in monochrome it is still necessary to have binder in the
color bottles for servicing.
WARNING
If this is the first time you have added binder to the binder bottle on the Z510 3D Printer
you must bleed the air out of the lines. Please refer to
Bleed Air
for detailed instructions
on how to perform this important procedure. Air in the binder fluids system will cause
premature print head burnout, resulting in more frequent replacement.
