manualshive.com logo in svg

YSI Model 52, Operation Manual

Share
Download
YSI Model 52 Operation Manual Download Page 44

YSI, Incorporated

Model 52

40

APPENDIX B REQUIRED NOTICE

The Federal Communications Commission defines this product as a computing device
and requires the following notice.

This equipment generates and uses radio frequency energy and if not installed and used
properly, may cause interference to radio and television reception. There is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

•

 

reorient the receiving antenna

•

 

relocate the computer with respect to the receiver

•

 

move the computer away from the receiver

•

 

plug the computer into a different outlet so that the computer and receiver are
on different branch circuits

If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet prepared
by the Federal Communications Commission helpful: “How to Identify and Resolve
Radio-TV Interference Problems.” This booklet is available from the U.S. Government
Printing Office, Washington, D.C. 20402, Stock No. 0004-000-00345-4

Summary of Contents for Model 52




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands