36
2. Touch [New] and choose from the selection of supported racks and plates. Alternatively, use the arrows to scroll
through the saved racks and plates until you find the type that you are using.
3. You may rename the rack/plate by touching its ID.
4. After selecting your plate or rack, touch the [Edit] button.
5. Touch the location of each sample for the first batch (selected locations are blue).
6. Touch [Batch].
7. Select the chemistries to run in this batch.
8.
Enter any optional parameters, such as Batch Name (separate name for this batch), Dilution Factor, Units, Multi-
Sample (multiples of each sample location in this batch), or Repeats (multiples of the entire batch).
Please note that the instrument does not automatically dilute samples.
9. If you diluted your samples:
a. Touch the Dilution Factor [1] button.
b. Enter your dilution factor then touch [OK].
10. To change the number of sample replicates:
a. Touch the Multi-Sample [1] button.
b. Enter the number of times each sample in the batch should be run, then touch [OK].
11. To repeat the entire batch:
a. Touch the Repeats [0] button
b. Enter the number of times the entire batch should be repeated.
12. Touch
to save the batch.
13. You may also create one or more batches for samples. Alternatively, you may create a separate rack for sample
batches.
Arrows
