York YLPA 0115SE, Installation, Operation And Maintenance Manual

Page: 41 / 90

41
JOHNSON CONTROLS
FORM 150.68-ICOM1
ISSUE DATE: 10/15/2020
EVAPORATOR WATER
PUMP 1 STATUS YYYY
EVAPORATOR WATER
PUMP 2 STATUS YYYY
EVAP PUMP TOTAL RUN
HOURS = XXXXX
Or with York Hydrokit option
PUMP TOTAL RUN
HOURS = XXXXX
Or with York dual pump Hydrokit option
PUMP NO1 TOTAL RUN
HOURS = XXXXX
PUMP NO2 TOTAL RUN
HOURS = XXXXX
ACTIVE REMOTE CTRL
NONE
LAST DEFROST SYS X
DURATION XXX SEC
TIME REMAINING TO
SYS X DEFROSTXXX MIN
TRAY HEATER STATUS
OFF
SYS X COMP STATUS
1=ON 2=ON 3=ON
SYS X RUN TIME
XX-XX-XX-XX D-H-M-S
SYS X OFF
XX-XX-XX-XX D-H-M-S
SYS X LAST STATE
COOLING
SYS X SP = XXXX PSIG
DP = XXXX PSIG"
SYS X ACTUAL SUCTION
CUTOUT = XXXX PSIG
SYS X AIR COIL DEFR
TEMP = XXX.X
o
F
SYS 1 MODE SV IS XXX
SYS 1 FAN STAGE XXX
The System 1 messages are displayed first and followed
by the System 2 messages. Explanations of the history
data messages are given under the STATUS, DISPLAY/
PRINT, SETPOINTS or UNIT keys.
Software Version
The software version may be viewed by pressing the
HISTORY key and then repeatedly pressing the DOWN
ARROW key until you scroll past the first history buffer
choice. The following message is an example of what
will be displayed:
CONTROL C.MMC.XX.XX
I/O C.MMC.18.XX
Where:
• C is the Product Classification and stands for
Commercial Unit
• MMC or M is the Family Code and stands for
Middle Market
• XX is the Field Revision Number
• ZZ = 16 which is the Product Code
• YY = 00 which is the Version Number