York YLPA 0115SE, Installation, Operation And Maintenance Manual

Page: 57 / 90

57
JOHNSON CONTROLS
FORM 150.68-ICOM1
ISSUE DATE: 10/15/2020
TABLE 2 - VALUES REQUIRED FOR BAS COMMUNICATION
SETTING DESCRIPTION
PROTOCOL
BACNET MS/TP MODBUS RTU
5
YORKTALK 2
DE MODIFIER ADDRESS 0 to 41943(3) 1 -1
DE MODIFIER OFFSET 0 to 99(4) 0 N/A
P1 PROTOCOL
BACNET N/A N/A
P1 MANUAL MAC ADDRESS 0-127(1) N/A N/A
P1 BAUD RATE 9600 To 76800 or Auto Selectable(1) N/A N/A
P1 PARITY
NONE N/A N/A
P1 STOP BITS 1 N/A N/A
P2 PROTOCOL N/A MODBUS SVR N/A
P2 MANUAL MAC ADDRESS N/A 0-127(1) N/A
P2 BAUD RATE N/A 19,200(2) N/A
P2 PARITY N/A NONE(2) N/A
P2 STOP BITS N/A 1 N/A
P2 HW SELECT BIT N/A RS-485 or RS-232(1) N/A
RESET REAL TIME ERROR N/A N/A N/A
P1 HW SELECT BIT N/A N/A N/A
CHILLER ID N/A N/A 0
1
As required by network
2
Or other as required by network
3
Number is multiplied by 100, set as required by network
4
Number is added to de modifier address, set as required by network
5
Unit operating software version C.Mmc.13.03 or later required for Modbus Protocol
Reboot required (cycle power) after set-
tings are changed.
The table below defines the real time error numbers
that may be encountered during communication setup
and a description of each.
TABLE 3 -
REAL TIME ERROR NUMBERS
ERROR
NUMBER (##)
DESCRIPTION
0 ALL OK
1 DATUM TYPE OK TEST FAILED
2 ENGLISH TEXT TOO LONG
3 FLOATING POINT EXCEPTION
4 GET PACKET FAILED
5 GET TYPE FAILED
6 INVALID UNIT CONVERSION
7 INVALID HARDWARE SELECTION
8 REAL TIME FAULT
9 SPANISH TEXT TOO LONG
10 THREAD EXITED
11 THREAD FAILED
12 THREAD STALLED
13 IO BOARD RESET
14 BRAM INVALID
15 BACNET SETUP FAILED