MENU
Operation mode
Initialize mode
Programming mode
Displays group level.
[Advanced]
Displays function level.
Displays constant level.
[Basic]
[Quick-start]
Application
Tuning
Reference
[Group]
b1 Sequence
Constant to be changed
C1 Accel/Decel
C2 S-curve Acc/Dec
[Function]
b1-01 Reference Source
b1-02 Run Source
b1-03 Stopping Method
C1-01 Accel Time 1
C1-02 Decel Time 1
[Constant]
[Mode]
Constant Access Levels
4.2.4 Operation Mode
4.2.4 Operation Mode
Operation mode is the mode in which the Inverter can be operated.
Many user constants can’t be changed when the Inverter is operating. Refer to User Constant List
for deta
ils.
The following monitor displays are possible in operation mode: The frequency reference, output
frequency,output current, and output voltage, as well as fault information and the fault history.
When running the Inverter after using digital operator, press the MENU Key to enter the operation
mode andthen press the DATA/ENTER Key from the operation mode display to bring up the monitor
display.Run commands
can’t be received from any other display. (Monitor display in the operation
mode appears when the
po
wer is turned ON.)
IMPORTANT
Operations in Operation Mode
Operations in Operation Mode
Key operations in operation mode are shown in Figure 4.6.
Is a registered trademark of yolico
YD3000N
و قرﺑ
وﺑار
ﮏﯾرﺗﮑﻟا
ﯽﺗﻌﻧﺻ نوﯾﺳﺎﻣوﺗا
