Name
No.
Factory
Setting
Setting
Name
No.
Factory
Setting
Setting
S-curve characteristic time at
deceleration start
(Scrv Dec @ Srat)
S-curve characteristic time at
deceleration end
(Scrv Dec @ End)
Slip compensation gain
(Slip Comp Gain)
Slip compensation primary delay time
(Slip Comp Time)
Slip compensation limit
(Slip Comp Limit)
Slip compensation during regeneration
(Slip Comp Regen)
Flux calculation method
(Flux Select)
Output voltage limited operation
selection
(Output V Limit)
Torque compensation gain
(Torq Comp Gain)
Torque compensation time constant
(Torq Comp Time)
Start torque compensation (forward
direction)
(F TorqCmp@ Start)
Start torque compensation (reverse
direction)(R TorqCmp@ Start)
Start torque time constant
(TorqCmp Delay T)
ASR proportional (P) gain 1
(ASR P Gain 1)
ASR integral (I) time 1
(ASR I Time 1)
ASR proportional (P) gain 2
(ASR P Gain 2)
ASR integral (I) time 2
(ASR I Time 2)
A S R l i m i t
(ASR Limit)
ASR primary delay time
(ASR Delay Time)
ASR switching frequency
(ASR Gain SW Freq)
ASR integral (I) limit:2
(ASR I Limit)
Carrier frequency upper limit
(Carrier Freq Max)
Carrier frequency lower limit
(Carrier Freq Min)
Carrier frequency proportional gain
(Carrier Freq Gain)
Carrier frequency proportional gain
(Carrier Freq Gain)
Hunting prevention gain
(Hunt Prev Gain)
A F R g a i n
(AFR Gain)
Speed feedback detection control
(AFR) time:2
(AFR Time)
Carrier frequency during autotuning:2
(Carrier in tune)
Frequency reference 1
(Reference 1)
Frequency reference 2
(Reference 2)
Min. output frequency voltage
(Min Voltage)
Min. output frequency
(Min Frequency)
Mid. output frequency voltage
(Mid Voltage A)
Mid. output frequency
(Mid. Frequency A)
Base frequency
(Base Frequency)
Max. voltage
(Max Voltage)
Max. output frequency
(Max Frequency)
V/f pattern selection
(V/F Selection)
Motor selection
(Motor Selection)
Input voltage setting
(Input Voltage)
Speed/torque control switching timer
(Ref Hold Time)
Speed limit bias
(Speed Lmt Bias)
S p e e d l i m i t
(Speed Lmt Value)
Speed limit selection
(Speed Limit Sel)
Torque reference delay time
(Torq Ref Filter)
Torque control selection
(Torq Control Sel)
+ − Speed limits:2
(Trim Control Lvl)
Frequency reference hold function
selection
(MOP Ref Memory)
Jump frequency width
(Jump Bandwidth)
Jump frequency 3
(Jump Freq 3)
Jump frequency 2
(Jump Freq 2)
Jump frequency 1
(Jump Freq 1)
Frequency reference lower limit
(Ref Lower Limit)
Frequency reference upper limit
(Ref Upper Limit)
Jog frequency reference
(Jog Reference)
Frequency reference 8
(Reference 8)
Frequency reference 7
(Reference 7)
Frequency reference 6
(Reference 6)
Frequency reference 5
(Reference 5)
Frequency reference 4
(Reference 4)
Frequency reference 3
(Reference 3)
User Constants (Continued)
User Constants (Continued)
* 1 . F a c t o r y s e t t i n g d e p e n d s o n t h e c o n t r o l m e t h o d ( A 1 - 0 2 ) .
* 2. Not displayed for some models depending on software version No.
* 3 . S e t t i n g u n i t a n d i n i t i a l s e t t i n g d e p e n d o n I nve r te r c a p a c i t y.
* 4. Setting for 200 V class Inverters. For 400 V class Inverters, double the value.
Is a registered trademark of yolico
YD3000N
نوﯾﺳﺎﻣوﺗا
ﯽﺗﻌﻧﺻ
ﮏﯾرﺗﮑﻟاوﺑار
قرﺑ
و