![background image](http://html.mh-extra.com/html/yokota/ys-e600/ys-e600_instruction-manual_3662214009.webp)
YS-e Instruction Manual 76-QD0444EN-00Y01-00.doc
9
1.6. Other Cautions
Caution
・
Use protector only specified by YOKOTA for prevention of wounds.
・
Do not touch the oil plug of the tool except repairing. It causes early oil leakage.
・
Using a tool which has been in storage for more than 6 months may cause oil leakage because of
damage to the seal part on the impulse mechanism.
We will overhaul the new tool which has been in storage for more than 6 months, for free of charge.
・
When using in cold place or in winter season, warming up for the power tool is required. Operate the tool
for about one to two seconds several times by loading the main shaft. If the warming up is not carried
out, slip phenomenon may occur. (pulses may not generate.).
・
In cold location or before starting the work in winter season, use fully charged battery pack.
If the battery pack is at low level, it may not be able to be used due to its protective function.
・
If the tool operates for approximately half of work rate with fully charged battery pack, it means the
expiry of its operating life. Buy a new battery pack.
・
If the tool is not used for long time, fully charge the battery pack before storage.
Even during storage, fully charge the battery pack at least once within one year of last charge.
Otherwise, over-discharge of the battery pack may prevent it from charging.
・
Lithium-ion battery used in this battery pack is recyclable and valuable resource.
If it is no longer used, bring it to your sales outlet, etc.