background image

 

YS-e Instruction Manual 76-QD0444EN-00Y01-00.doc 

Before doing the following actions, remove the battery pack from the tool. Otherwise, it may accidentally 

operate and result in injury. 

Storage or repair of the tool 

Replacement of socket and bit   

Other cases in which the operation of the tool may result in danger. 

Store  the  product  in  the  dry  area,  where  children  or  untrained  person  can  not  get  access  to.  It  is 

dangerous for the untrained person to use it. 

Confirm the torque periodically by the torque wrench after tightening the bolt, nut and so on. 

 

 

Caution 

If the tool is suspended by balancer, etc., mount the hanger on the tool according to 

Accessories

 

shown below.

 

Mount YOKOTA-specified parts for hangers. 

Use the mounting holes for hanger only for mounting YOKOTA-specified parts. 

Make sure that hooking parts such as balancer are reliably mounted on hanger of this product. Check, at 

a regular interval, .the following inspections on: 

 

No damage of hooking parts such as balancer, and correct mounting condition. 

 

No damage on hanger. 

 

 

1.5.  Maintenance, Inspection, and Repair 

  Warning

 

Before maintenance, inspedtion, and replacement, remove the battery pack. 

Only  qualified  service  personnel  are  allowed  to  do  maintenance  and  repair  the  tool.  Repair  or 

maintenance performed by non-qualified personnel may result in serious personal injury of the user.   

Wipe out the dirt on the housing of the tool by using the dry and soft cloth.   

Do not use the chlorinated solvent, gasoline, thinners and the like, which work to melt the plastic.   

Ask  repair  and  inspection  to  YOKOTA  or  YOKOTA-authorized  or  designated  servicing  factory  via  the 

sales outlet or sales representative where you bought the product. If any accident or problem occurs due 

to the customer

s intended action such as disassembly of this product, we shall not be liable for such 

trouble. 

If the battery pack or the battery charger is damaged, be sure to ask us or our qualified (designated) 

servicing factory to replace or repair it via your sales outlet or sales agent.

 

 

Summary of Contents for YS-e600
























Reviews: