YS-e Instruction Manual 76-QD0444EN-00Y01-00.doc
5
・
If you do not use the product, unplug the battery charger.
Wipe out dust or stain accumulated on the power plug or receptacle with a dry cloth. Failure to do so may
result in electric shock or fire.
・
Do not insert or remove the power plug of the battery charger from the receptacle with wet hand.
Doing so may result in electric shock.
・
Charge the battery pack in well-ventilated place. While charging, do not cover the ventilation openings on
the battery pack and battery charger with cloth. Doing so may result in rupture or fire.
・
Do not charge the battery pack at less than 0
℃
or more than 40
℃
. Doing so may result in rupture or fire.
・
Do not store the battery pack in a place reaching over 50
℃
. Doing so may cause deterioration of the
battery pack and result in smoking or fire.
・
Attach an anti-short-circuit cap after the battery pack is removed from the tool or the battery charger or
when the tool is not used. Failure to do so may result in short-circuit of the terminals of the battery pack
and fire.
1.3. Human Safety
Warning
・
Do not use the tool when you are tired or under influence of drugs, alcohol or medication.
A moment of inattention during the use of tool may result in serious personal injury.
・
To protect yourself, wear personal protective equipment such as a hard hat(helmet), safety glasses,
safety shoes.
And depending on work environment, wear earplugs, a dust mask etc.
・
Before doing the following actions, make sure that the throttle lever is at stop position. Otherwise, the
tool may accidentally operate and it may result in injury.
・
Torque adjustment
・
Replacement of socket and bit
・
Insertion of the battery pack
・
Other cases in which the operation of the tool may result in danger.
・
If carry the tool, do not put your hand on the throttle Lever.
Otherwise, the tool may accidentally operate and it may result in injury.
・
Before attachment of the battery pack to the tool, make sure that the tools such as spanner used for fixing
the accessory, pins used for capability adjustment are removed.
・
Working in unusual positions is dangerous. Hold the tool securely and carry out working in stable posture,
preparing for accidental movement at the same time.
・
Dress properly. When working, do not wear loose clothes or jewellery such as necklace. If your hairs are
long, bundle them with rubber ring to avoid contact with the tool and wear a protective cover such as
cap. Otherwise, it may cause injury.
・
If the electrolyte of the battery gets in your eyes, do not pass your hand over your eyes, but flush them
with a plenty of clean water and seek medical attention. Failure to do so may result in loss of vision.
