4-23
IM 04P01B01-17E
Commands
4
• On models with the computation function (/M1
option), computation channels can be
specified.
UB
Sets the display mode of the bar
graph.
Syntax
UB p1,p2
<terminator>
p1
Channel number
p2
Bar graph display mode
NORMAL
The reference position is set
to the smaller of the two
values, leftmost value and
rightmost value.
CENTER
The reference position is set
to the 50% position.
Query
UB[ p1]?
Example
Display channel 01 using a bar graph with the
reference position set to the 50% position.
UB 01,CENTER
Description On models with the computation function (/M1
option), computation channels can be specified.
UI
Sets whether to use moving
average (dot model).
Syntax
UI p1
<terminator>
p1
Use/Not use moving average (USE, NOT)
Query
UI?
Example
Use moving average.
UI USE
UJ
Sets whether to use the input
filter (pen model).
Syntax
UJ p1
<terminator>
p1
Use/Not use the input filter (USE, NOT)
Query
UJ?
Example
Use the input filter.
UJ USE
UK
Sets whether to use of partial
expanded recording.
Syntax
UK p1
<terminator>
p1
Use/Not use partial expanded recording
(USE, NOT)
Query
UK?
Example
Use partial expanded recording.
UK USE
UL
Selects the display/printout
language.
Syntax
UL p1
<terminator>
p1
Language (ENGLISH, JAPANESE,
GERMAN, FRENCH)
Query
UL?
Example
Use English.
UL ENGLISH
XN
Selects the date format.
Syntax
XN p1
<terminator>
p1
Date format for displaying and printing
Y/M/D: (example) 2005/08/31
M/D/Y: (example) 08/31/2005
D/M/Y: (example) 31/08/2005
D.M.Y: (example) 31.08.2005
M.D.Y: (example) Aug.31.2005
Query
XN?
Example
Set to the "2005/08/31" format.
XN Y/M/D
Description This setting applies to the format of the date
shown on the display and the date printed on the
periodic printout, manual printout, alarm printout,
message printout, recording start printout, new
chart speed printout, and start printout and end
printout (header printout (/BT1 option)).
Note
How this setting applies to the time printout format of the
alarm printout, message printout, recording start printout,
and new chart speed printout: The setting specifies the
format of the "M/D" and "Y/M/D" section when the time
printout format is set to "M/D H:M," "M/D H:M:S," or "Y/M/
D H:M:S."
XT
Selects the temperature unit.
Syntax
XT p1
<terminator>
p1
Temperature unit
C
°
C
F
°
F
Query
XT?
Example
Use
°
F.
XT F
UF
Sets whether to use the
extended functions.
Syntax
UF p1,p2,p3,p4,p5
<terminator>
p1
Bias function (USE, NOT)
p2
Square root low-cut function (USE, NOT)
p3
1-5V input low-cut function (USE, NOT)
p4
Alarm delay function (USE, NOT)
p5
Calibration correction function (USE, NOT)
(/CC1 option). This cannot be used with the
bias.
Query
UF?
Example
Use the calibration correction extended function.
The bias function is not used.
UF NOT,USE,USE,USE,USE
Description • The input offset is set using the VB command.
• The low-cut function is set using the SR
command.
• The delay alarm is set using the SA and BD
commands.
4.5 Basic Setting Commands
