YOKOGAWA vigilantplant EXA ISC202G, User Manual

Page: 95 / 121

IM 12D06A03-01E
Appendix 3-3
3/4
QIS 12D06A03-01E
Table 3 SEL.10
Indication Setpoint of Resistance Box 2 Indication Range
RES. 1
30.00 :
0.300±0.002
RES. 3 800.00 : 8.00±0.04
RES. 5 30.00k : 300±2
x
Change the number of turns of wire onto the ISC40GJ sensor from ten to one.
x
Press the [ENT] key. The message display shows “ WAIT ” momentarily, followed by
“RES.6.”
x
Set resistance box 2 to the value shown in Table 4 and check the indication. The resistance
indication must be within the range.
x
Press the [ENT] key. The message display shows “ WAIT ” momentarily, followed by
“RES.7.” There is no need to check here, so just press the [ENT] key.
x
The message display shows “ WAIT ” momentarily, followed by “RES.8.”
x
Set resistance box 2 to the value shown in Table 4 and check the indication. The resistance
indication must be within the range.
x
Press the [ENT] key. The message display shows “ WAIT ” momentarily, followed by
“RES.9.”
x
Set resistance box 2 to the value shown in Table 4 and check the indication. The resistance
indication must be within the range.
x
After the test, press the [ENT] key. The message display shows “READY.”
x
Press the [ENT] key to restart the transmitter.
Table 4 SEL1
Indication Setpoint of Resistance Box 2 Indication Range
RES. 6
300.0 :
300±2
RES. 8 8.000k : 8.00±0.10k
RES. 9 80.00k : 80.0±6.3k