4-52
IM 04L51B01-41EN
Station number setup tab
Set the specification method of station numbers for devices connecting to routers.
The items on the Station number setup tab are the same regardless of whether the Detailed
view check box is selected.
■ Setting the terminal information
Set the following items. Click
Save to module
to apply the set information to the wireless
communication module.
Item
Description
Specification
method of Station
numbers
Select the specification method of Station numbers (List, Range). (*)
● If you select List, click
Station number list
to open a Station number list
window, and set the station number list.
In the Station number list window, register combinations of routers’ short
addresses and station numbers of devices connected to the routers.
● If you select
Range
, select the maximum number of multidrops (1/1 to 4/1 to 8/1
to 16/1 to 31).
*: To use no station number analysis mode, set
Station number analysis
to
No on the
Protocol setup tab.
■ Loading the current settings from the wireless communication module
Click
Load from module
to load the current settings from the wireless communication
module. You can change the terminal information based on the loaded information.
4.7 Configuring the Coordinator Module (Low-speed moving body)
