4-47
IM 04L51B01-41EN
Using the Maintenance Console
1
2
3
4
5
10
App
Disconnecting from the Wireless Communication Coordinator Module
Click
Disconnect
in the top area of the Coordinator configuration window to disconnect from
the wireless communication module.
Note
Do not remove the USB cable or cut off the power supply when the maintenance console is
connected to a wireless communication module. If you perform these acts while data is being
written to the wireless communication module (during firmware updating or configuration), the
configuration information may become corrupted.
Setting the Terminal Information of the Wireless Communication Module (Basic
configuration tab)
Set terminal information of the wireless communication module.
The following figure shows the window with the Detailed view check box selected. If you
remove the Detailed view check box, only the items with a check mark in the Simple view
column of the next table are displayed.
4.7 Configuring the Coordinator Module (Low-speed moving body)