4-70
IM 04L51B01-41EN
Configuring Serial Communication (Communication setup tab)
Configure the serial communication settings between the wireless communication module
and devices.
The items on the Communication setup tab are the same regardless of whether the Detailed
view check box is selected.
■ Setting the information
Set the following items. Click
Save to module
to apply the set information to the wireless
communication module.
Item
Description
Equipment
Connection
Select whether there are connections to devices. To use the module only as a
repeater, set
Equipment Connection
to No.
Bit rate
Select 115200 bps.
Bit length
The bit length is fixed to 8 bit.
Stop bit
Select the stop bit (1 bit).
Parity
Select the parity (None).
■ Loading the current settings from the wireless communication module
Click
Load from module
to load the current settings from the wireless communication
module. You can change the interface information based on the loaded information.
4.8 Configuring the Router Module (Low-speed moving body)
